Apacer AS2280P4 M.2 1000 GB PCI Express 3.0 3D TLC NVMe
84,59 €
IGIC incluido
IGIC incluido
ANTES
84,92 €
CONDICION Nuevo y precintado
Modelo AP1TBAS2280P4-1
EAN 4712389918253
Características técnicas
Marca:Apacer
Nombre de producto: AS2280P4
Código del producto: AP1TBAS2280P4-1
Especificaciones
Características
Versión NVMe
1.3
Factor de forma de disco SSD
The size of the solid-state drive, given in inches
M.2
SDD, capacidad
The Solid State Drive's data storage capacity.
1000 GB
Interfaz
Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
PCI Express 3.0
Tipo de memoria
Type of memory in the device e.g. DDR3, SRAM (Static RAM).
3D TLC
NVMe
NVM Express (NVMe) or Non-Volatile Memory Host Controller Interface Specification (NVMHCIS) is an open logical device interface specification for accessing non-volatile storage media attached via a PCI Express (PCIe) bus. NVM Express, as a logical device interface, has been designed to capitalize on the low latency and internal parallelism of solid-state storage devices.
Componente para
What this product is used as a part of (component for).
PC/ordenador portátil
Velocidad de lectura
The speed at which a device can read data.
3000 MB/s
Velocidad de escritura
Write speed for type of media; expressed in bytes per second
2000 MB/s
Soporte S.M.A.R.T.
Soporte TRIM
Control de energía
Voltaje de operación
Defines the range of operating voltages available
3,3 V
Consumo de energía (promedio)
4 W
Condiciones ambientales
Intervalo de temperatura operativa
The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Intervalo de temperatura de almacenaje
The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Golpes en funcionamiento
Environmental requirements for optimal protection from impact in operating mode
1500 G
Peso y dimensiones
Ancho
Medidas o extensión de lado a lado.
22 mm
Profundidad
La distancia desde el frente hasta atrás.
80 mm
Altura
Altura del producto.
2,38 mm
Peso
Peso del producto sin embalaje (peso neto). Si es posible, se da el peso neto incluyendo los accesorios y suministros estándar. Tenga en cuenta que a veces el fabricante deja de lado el peso de los accesorios y / o suministros.
6,8 g